-runstyle gnuparallel only uses one core
Posted: Thu May 06, 2021 5:48 pm
First, thanks for making your software available. I have few hundred homology models to make, and I want to keep pressure off of your server.
So, I've installed I-Tasser 5.1 on a CentOS Stream guest operating system configured with 8 cores in VMWare (on an OS-X host). I'm able to run the program in serial mode OK. I installed gnu parallel and it seems to have compiled OK. I'm giving the program the
-runstyle gnuparallel
command line argument, but "top" indicates it is only using one processor. There are several jobs running at 0.1 to 0.29 CPU. Is there an additional argument I should pass with gnuparallel to get it to. grab more cores? I looked at the README and didn't see anything. I thought I'd ask here in case there is something easy to do, before I start going through code.
Thanks!
So, I've installed I-Tasser 5.1 on a CentOS Stream guest operating system configured with 8 cores in VMWare (on an OS-X host). I'm able to run the program in serial mode OK. I installed gnu parallel and it seems to have compiled OK. I'm giving the program the
-runstyle gnuparallel
command line argument, but "top" indicates it is only using one processor. There are several jobs running at 0.1 to 0.29 CPU. Is there an additional argument I should pass with gnuparallel to get it to. grab more cores? I looked at the README and didn't see anything. I thought I'd ask here in case there is something easy to do, before I start going through code.
Thanks!